Page Comparison

Below are the setup items to be used for each task that you configure in the system.

Label	Required/Optional	Type	Value	How it's Used
Task Management Screen
Run Task Assignment Process		Button		Kicks off the task assignment process via the UI.
Run Task Escalation Process		Button		Kicks off the task escalation process via the UI.
Queue Setup
Queue Name	Required	Text - 50 characters max
Hide Queue	Optional	Checkbox		When this box is selected, the queue is hidden from the Task menu on the UI in the "All Tasks" grouping. When unselected, the task queue will appear/reappear on the menu.
Task Setup - General Tab
Task Grid
Task Type	Read Only	Text		If any of the following task types are chosen, the Document Setup tab will become available for editing: Review Student Document(s) Review Conflicting Information Document(s) Review C-Code Resolution Document(s) Review Verification Document(s) Review PJ Document(s) Review All Actionable Documents Review Facilitate Military Review Document(s)
Triggering Event	Read Only	Text
Queue	Read Only	Text
Due Date Offset	Read Only	Text		The number of days after creation, that the task is due.
Active	Read Only	Text	Active Inactive	More than one active task can be set up, using the same task type, at any given time, however, they must filter into different task queues.
Description	Read Only	Text
Triggering Event Details Section
Task Type	Required	Drop down	Populate with the list of all task types available in the system.
Triggering Event	Read Only	Display the triggering event based on the type chosen.
Default Queue	Required	Drop down	Populate with the names of the task queue set up on the Queue setup tab.	For the following task types, regardless of what task queue the current task is in (the task could have been moved to a different task queue since it was created), a new task should not be created if the current task is not Completed, Closed, or Waived and there has been no change. Review Student Document(s) Review Conflicting Information Document(s) Review C-Code Resolution Document(s) Review Verification Document(s) Review PJ Document(s) Review All Actionable Documents Review Facilitate Military Review Document(s)
Default Priority	Required	Drop down	Urgent High Medium Low
Default Status	Optional	Drop down	Open In Process Completed Waived Closed Re-opened On-hold
Active	Required	Checkbox		Indicates if the triggering event is active, or not (in use by the institution or not)
Description	Required	Text - 255 characters max		Task Description based on Task setup
Task Priority Escalation Section
Date Used for Task Escalation	Optional	Drop down	Task Creation Date (default) Admitted Date / Graduation Date	This date is to be used to calculate the final due date of the task. If "Task Creation Date" is selected, Regent Award will look at the date the task was created, and add or subtract the offset days entered on the UI, to calculate the due date of the task. If the "Admitted Date / Graduation Date" is selected, Regent Award will look at both dates, per the task, and use the following logic in order to calculate the due date of the task: If the task created date is less than or equal to the Admitted Date, then use the Admitted Date to set the task's due date (with the option of also indicating a number of days offset), OR If the task created date is greater than the Admitted Date, then use the Graduation Date to set the task's due date (with the option of also indicating a number of days offset) If the Admitted Date and Graduation Date are null on the SBL, the task due date will also be null. If the priority of the task is manually set, Regent Award will respect that value and the process will not override that value.
Due Date Offset	Optional	Numeric - 3 digits max	Allow positive and negative numbers	This field determines the number of days after task creation, that the task is due based off of calendar days with no consideration for weekends, holidays, etc. If the field is left blank, the task will not be assigned a due date. The due date will be null, and editable by the end user. If 0 is entered, the task due date will be the date chosen in the "Date Used for Task Escalation" field. If a negative number is entered, the due date will be that number of days before the selected "Date for Escalation". If a positive number is entered, the due date will be that number of days after the selected "Date for Escalation".
Low	Optional	Numeric - 3 digits max	Allow positive and negative numbers	The same number of days cannot be entered in the Low, Medium, High, and Urgent fields. The value entered in "Low' must be greater than the values entered in all other fields. The value entered in "Medium" must be greater than the values entered in "High" and "Urgent", but must be less than the value entered in "Low" The value entered in "High" must be greater than the value entered in "Urgent". but must be less than the values entered in "Low" and "Medium" The value entered in "Urgent" must be less than the values entered in all other fields.
Medium	Optional	Numeric - 3 days max	Allow positive and negative numbers
High	Optional	Numeric - 3 days max	Allow positive and negative numbers
Urgent	Optional	Numeric - 3 days max	Allow positive and negative numbers
Document Setup Tab
Select All Document Use Types	Optional	Checkbox	Selected Unselected (default)	If this box is selected, hide the Document Use setup portion of the screen. If unselected, hide Status selection.
Available Statuses	Optional	Multi-select list box	Satisfied Unsatisfied Needed Received Incomplete Waived	By selecting these statuses, you are creating a task trigger that will trigger a task when documents with any use type (i.e. all student documents) are in one of the selected statuses. For example: If you choose Waived, Satisfied, and Received - all of the student's documents must be in one of these three statuses in order to trigger the task.
Task Trigger For	Required	Drop-down	All (default) Each	This selection will determine if a task is triggered "Each" time a document of the selected document use type is placed in one of the statuses selected (if an open task of the task type chosen on the general tab does not already exist in a status other than Closed, Completed or Waived); OR if a task is triggered when "All" documents of the selected document use type are in one of the statuses selected (if an open task of the task type chosen on the general tab does not already exist in a status other than Closed, Completed or Waived). The "All" functionality may be used in two ways: If you choose multiple document use types on a single task setup, that use "All" - then the task will trigger when all documents, on the student's record, of any one of those use types meet the status options chosen (think of this as an "or" between the various document use types you've chosen). If you choose only one document use type, setup with "All" on a single task setup, then the task will trigger when all documents, on the student's record, of that use type, meet the status options chosen.
Selected Statuses	Optional	Multi-select list box	Display those statuses chosen from the "Available" list
Add Task Trigger	N/A	Button
Task Trigger For	Required	Drop-down	All Each	Determines if the configured task trigger will look at the set of all documents of the selected use type(s) or each document of the selected use type(s).
Document Use Type(s)	Required			User is able to select from a list of document use types from a pop-up when selecting the "Edit Document Use Type" button
Apply to All Scopes	Optional	Checkbox	Selected Unselected
Edit Document Use Types	N/A	Button		Button opens the Document Use Type selection pop-up.
FAY Scope Value(s)	N/A			User is able to select from a list of FAYs from a pop-up when selecting the "Edit FAY Scope Value" button
Edit FAY Scope Value(s)	Optional	Button		Button opens the Scope Value selection pop-up.
Include Student Scope	Optional	Checkbox	Selected Unselected	If this box is selected, student scoped documents will be considered in the task triggering criteria. If this checkbox is selected, and FAY scope values are selected, then both student scoped documents, and documents with the selected FAY scoped values, will be considered in the task triggering criteria.
Selected Statuses	Required			Displays those statuses that will trigger a task for the selected document use type. I.e., when all of the student's documents that have the document use type chosen are in one of the selected statuses, a task will be triggered. For example: If you have chosen a Document Use type of "Facilitate Verification," and you've also chosen the statuses of Waived, Satisfied, and Received - all of the students documents that are of the Document Use type "Facilitate Verification," must be in one of the three statuses chosen in order to trigger the task.
Edit Statuses	N/A	Button		When the user clicks on “Edit Statuses,” a pop-up window appears where the user can select statuses that will trigger the task for the document use type chosen.
Delete	N/A	Button
Restrict Process Setup Tab
Available Processes	Optional	Multi-select list box	Restrict Packaging Restrict Positive Disbursements Restrict Positive and Negative Disbursements	If a task is set with any of these restricts, it also, inherently, restricts export to COD. If a Task is configured to restrict only specific selected fund(s), the restricts should not affect processes or award from other, unselected funds. For any of these restrict processes, if the task is not in a status of Completed, Closed, or Waived, then the student's packaging/disbursement and COD export should be blocked for the selected funds. Once the task is in a status of either Completed, Closed, Waived, the student should package as normal (assuming nothing else is blocking the student from packaging), and export to COD on the next export file, if the student has been flagged with COD changes.
Restrict Process	Optional	Multi-select list box		Displays the chosen restricted processes.
Select all funds	Optional	Checkbox	Selected (default)	This option will select all funds at the campus, to be associated with the chosen restrict process(es)
Available Funds	Optional	Multi-select list box	Funds available at the campus, both active and inactive	The task will restrict the process chosen above, for the funds selected here.
Assigned Funds	Optional			Displays only those funds chosen from the available funds list.
Triggering Funds Tab
Triggering Funds Tab	Optional	Tab	Disabled (default) Enabled	This tab is only enabled for the "Review Overaward for Unpaid Disbursements" Task
Select all funds (including ones that may be set up in the future)	Required	Checkbox	Selected (default) Unselected	If "Select all funds...." is selected the Task will trigger for any unpaid disbursements in the over-awarded loan period. If "Select all funds...." is not selected, the user may select specific funds. The Task will only trigger if a loan period has at least one unpaid disbursement from the selected funds. Full task requirements can be found on Regent Award Task Triggers
Available Funds	Optional	Multi-select list box	Funds available at the campus, both active and inactive
Selected Funds	Optional	Multi-select list box	Funds chosen by the user associated with the task trigger.

...

Versions Compared

Old Version 5

New Version 6

Key